Xawtv no picture

hello guys,
I need help on xawtv. My tv card is listed as card number 21 ( image world conference tv card bt878). When i start Xawtv, i get a black image even if i tune the frequency. After examening i saw that in the sources tab only my usb camera is listed and the tv card is not listed so there could be a problem concerning bttv modules. Can somebody help me i am running redhat 9?

This is what my error log tells me:
Oct 7 19:16:25 SERVER kernel: i2c-core.o: i2c core module
Oct 7 19:16:25 SERVER kernel: i2c-algo-bit.o: i2c bit algorithm module
Oct 7 19:16:25 SERVER kernel: bttv: driver version 0.7.104 loaded
Oct 7 19:16:25 SERVER kernel: bttv: using 4 buffers with 2080k (8320k total) for capture
Oct 7 19:16:25 SERVER kernel: bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
Oct 7 19:16:25 SERVER kernel: bttv: Bt8xx card found (0).
Oct 7 19:16:25 SERVER kernel: PCI: Found IRQ 5 for device 00:11.0
Oct 7 19:16:25 SERVER kernel: PCI: Sharing IRQ 5 with 00:11.1
Oct 7 19:16:25 SERVER kernel: bttv0: Bt878 (rev 17) at 00:11.0, irq: 5, latency: 32, mmio: 0xe9001000
Oct 7 19:16:25 SERVER kernel: bttv0: using: BT878(Lifeview FlyVideo 98/ L) [card=21,insmod option]
Oct 7 19:16:25 SERVER kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0.
Oct 7 19:16:25 SERVER kernel: bttv0: FlyVideo_gpio: unknown tuner type.
Oct 7 19:16:25 SERVER kernel: bttv0: FlyVideo Radio=no RemoteControl=no Tuner=-1 gpio=0x3fc0ff
Oct 7 19:16:25 SERVER kernel: bttv0: FlyVideo LR90=yes tda9821/tda9820=no capture_only=no
Oct 7 19:16:25 SERVER kernel: bttv0: using tuner=1
Oct 7 19:16:25 SERVER kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found
Oct 7 19:16:25 SERVER kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Oct 7 19:16:25 SERVER kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Oct 7 19:16:25 SERVER kernel: i2c-core.o: driver i2c TV tuner driver registered.
Oct 7 19:16:25 SERVER kernel: tuner: probing bt848 #0 i2c adapter [id=0x10005]
Oct 7 19:16:25 SERVER kernel: tuner: chip found @ 0xc0
Oct 7 19:16:25 SERVER kernel: tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles))
Oct 7 19:16:25 SERVER kernel: i2c-core.o: client [Philips PAL_I (FI1246 and compat] registered to adapter [bt848 #0](pos. 0).
Oct 7 19:16:25 SERVER kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Oct 7 19:16:25 SERVER kernel: bttv0: registered device video1
Oct 7 19:16:25 SERVER kernel: bttv0: registered device vbi0

And this is what i get when i type in the command "xawtv" in a console
This is xawtv-3.81, running on Linux/i686 (2.4.20-20.9)
/dev/video0 [v4l]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Cannot convert string "-*-ledfixed-medium-r-semicondensed--39-*" to type FontStruct
Xlib: extension "XFree86-DRI" missing on display ":0.0".
station "?" not found
ioctl: VIDIOCMCAPTURE(frame=0;height=48;width=64;format=5): Invalid argument
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 2 (X_ChangeWindowAttributes)
Resource id in failed request: 0x2400057
Serial number of failed request: 442
Current serial number in output stream: 442


And this is for v4l-conf
[root@SERVER root]# v4l-conf
v4l-conf: using X11 display :0.0
dga: version 2.0
mode: 1024x768, depth=16, bpp=16, bpl=2048, base=0xe4000000
/dev/video0 [v4l2]: ioctl VIDIOC_QUERYCAP: Invalid argument
/dev/video0 [v4l]: no overlay support
[root@SERVER root]#

I think the card isn't compatible with linux. Try locating a generic driver for it.