|
|||||||||
|
|||||||||
| |||||||||
|
|||||||||
|
|||||||||
| |||||||||
|
|
|
| |||||||||
 |
|
|
«
Previous Thread
|
Next Thread
»
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
Dev Shed Forums Sponsor:
|
|
Be the architects of evolution and help create the mobile internet future. It’s your move---enter to win here! |
|
#1
August 19th, 2004, 10:14 PM
|
|||
|
|||
|
Help! Upgrading CPU
I have a couple of boxes with different mobos. In one I have a Celeron 1.7 on a Gigabyte VIA PT800 board. I tried to upgrade to a P4 2.4 1MB, but no matter what I did, it wouldn' t post. No video at all. I tried three different boards, but no go. Now I tried a new Celeron D320. Same problem. I pulled the battery on the board to reset CMOS, but no good. PLEASE HELP with any suggestions at all....
|
|
#2
August 20th, 2004, 12:27 AM
|
|||
|
|||
|
Hey,
I kinda dont understand your problem, does it boot up with your Celeorn 1.7Ghz. Are you sure those boards support 2.4Ghz?
|
|
#3
August 20th, 2004, 09:02 AM
|
||||
|
||||
|
I'm guessing your board won't support the new prescott core cpus. (The Celeron 320 has a prescott core, and I assume your "P4 2.4 1mb" refers to Prescott's 1mb of L2 cache).
If that is the case, you'll need to buy a cpu with the Northwood core. (Which is better anyway at those speeds). Look on Newegg, the core is noted for each cpu.
__________________
--Dave-- U2kgSG9jIExlZ2VyZSBTY2lzLCBOaW1pdW0gRXJ1ZGl0aW9uaXMgSGFiZXM=
|
|
| Viewing: Dev Shed Forums > Computer Hardware > Computer Hardware > Help! Upgrading CPU |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
 |
|
|
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
Linear Mode
