Page 1 of 2 12 Last
  • Jump to page:
    #1
  1. No Profile Picture
    Junior Member
    Devshed Newbie (0 - 499 posts)

    Join Date
    Dec 2003
    Posts
    1
    Rep Power
    0

    Overclock with Biostar M7NCD and Athlon XP 2600+


    Hi everyone, I'm very new to the overclocking subject and I would like to perform one to a machine with:

    MoBo: Biostar M7NCD up to 400Mhz
    CPU: Athlon XP 2600+ 512k L2 333Mhz
    RAM: PC2700 256MB

    Please, if somenone have the same equipment I would appreciate your help to do an overclock to this machine.

    Or if you just know how even you have another equipment your help is welcome too.

    Thanks a lot !!

    Raenk
  2. #2
  3. No Profile Picture
    Contributing User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Jul 2003
    Location
    Mississippi
    Posts
    475
    Rep Power
    11
    well first thing you need to be aware of , heat, what is the normal operating temp of the cpu now, if it is within 25-39 degrees C you can overclock, far as i would go would be up to 47 during heavy load. overclocking voids any warrenty you may have on you motherboard, processor and ram. or manufacturer's warrenty for the whole pc. depending on your board you may have dip switches on the board which can be set to the desired speed, or it could just be you need to increase the front side bus speed in the bios. some involve different methods. you should have the motherboard manual, if not download it from the biostar site. if you mess around with the settings and the system does not boot, use the cmos jumper to clear the settings and start again. i dont really like to reply to overclocking post because it is not a problem that needs to be fixed, but it is a problem in the making. but you will probably do it anyway so.....make sure you have plenty cooling fans, read the motherboard manual, and use your best judgment. if done wrong this could cost you.
  4. #3
  5. No Profile Picture
    Junior Member
    Devshed Newbie (0 - 499 posts)

    Join Date
    Dec 2003
    Posts
    1
    Rep Power
    0
    I have the exact same setup with 512MB pc3200 ram. The only settings available in the bios are fsb and a load of memory tweaks. No vcore, multiplier or ratios even though the board claims to have them. I've read many posts about the processors stability when overclocking but my board wont let me go past 179mhz fsb even though i know the processor will go well past that. Is there any way to enable the bios settings for multiplier and vcore on this board. i have the latest bios but no change. Colling is not a problem as i have more than adequate processor fan and 3 system fans. Can anyone help?!
  6. #4
  7. No Profile Picture
    Contributing User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Jan 2004
    Posts
    221
    Rep Power
    11
    I have a Barton 2500 with 512 MB of 2700 memory on the M7NCD. I changed the FSB to 200 mhz. I was running about 50 idle and 70 under load (Prime 95). Prime 95 is some sort of program that searches for the largest prime number or something like that. It is useful because it stressed your system with 100% CPU utilization. And if you get an error message it's your PC's fault. That's what I was told, I can't swear it's true.

    I changed to a better case with more air circulation and my temps dropped down to 34 idle and 50 under load. I added another fan to my case but that doesn't seem to help much and now I'm getting Prime 95 errors.

    My next plan is to change to a Volcano 11+ CPU cooler with Arctic Silver 5 and see what that does.

    I think the software on the Mobo CD will allow you to change the core voltage but I can't get it installed. I keep getting an error message that says I need to install the driver first. Hello, I've installed the driver! The WarpSpeeder utility has some inoperable icons that probably allow voltage changes but I can't get them unlocked. I read on another board to try changing the memory to 7/3/3/3 in the BIOS.

    True, OC isn't something that needs fixing but it is educational to learn how the different parts of the PC work.

    I pushed my FSB to 220 mhz but then it wouldn't boot and I had to reset the CMOS via the jumper.

    Good luck and if you find anything else out , please post.

    Lenny
  8. #5
  9. No Profile Picture
    Contributing User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Jan 2004
    Posts
    221
    Rep Power
    11
    I've installed the 11+ Volcano along with the Arctic Silver 5. I took one of the pots that came with the Volcano and spliced a the front intake case fan into it. The exhaust fan is temp controlled. It is very cool to hear the Volcano rev up when the CPU gets to 100% utilization. I'm running 34C idle and 42C under full load with the Barton 2500 at 2.2 gigahertz. (11 x 200). Very stable (knock on wood ;-)
  10. #6
  11. No Profile Picture
    Registered User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Mar 2004
    Location
    minnesota
    Posts
    7
    Rep Power
    0
    I have a simular setup...

    MB: Biostar M7NCD up to 400Mhz
    CPU: Athlon XP 2600+ 512k L2 (barton)***
    RAM: PC3200 512MB
    and a volcano 12

    I got the fsp up to 332 and the cpu upto 1.9 ghz, the fan turned upto the max kept the temp around 28c. The bios has a setting for 400fsb, but it wont even boot into the bios, so i have to reset the cmos everytime.
    I used NVIDIA system untility, and that got things going a little higher, but i can't get the vcore up, the mb came with a crappy warpspeeder program, but all the oc options are locked. I'm stuck here too. Does anyone know if there is a reg hack for something like this??? I'll look around some more and post a solution if i find one.
    Last edited by M. F. Grape; March 26th, 2004 at 11:28 PM.
  12. #7
  13. No Profile Picture
    Registered User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Apr 2004
    Posts
    1
    Rep Power
    0
    I just purchased a m7ndc and then started reading up on it (kind of backwards!!). Anyway, found out that it does not have any vcore or multiplier options. The board is missing a nVidia chip that is on the m7ndc pro, which allows the board to perform those functions.
    I will also be using a 2600 barton on the board. This 2600 is unlocked and had posted as a 3200 on my abit nf7 (not the "s") with stock vcore. Hopefully this will be the case with the m7ncd. If not, I was considering using the wire trick to set the cpu to 200fsb and a higher vcore. Has anyone tried this yet? I've used the wire trick on other boards and cpus with some success but never on a biostar board.
  14. #8
  15. Contributing User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Mar 2003
    Posts
    193
    Rep Power
    12
    I've overclocked this CPU via the Bios. Works perfectly for me. Just make sure you have a good cooling system in place, in case it heats up. When you overclock it, monitor the cpu temperature (you can get this through the bios too -- if not, there are third party applications out there that will allow you to see this). If the temp. is going up too much, you could just revert back to the original settings.

    Saving money is easy with discount codes from Rollback coupons. Coupon codes for online purchases.
  16. #9
  17. No Profile Picture
    Registered User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Jun 2004
    Posts
    2
    Rep Power
    0
    please help me!!
    i have just bought a athlon amd xp 2600 with a n-vidia biostar mobo.
    it runs at a clock speed of 1250 mghrtz and i am very dissapointed with it!!!.
    i want to get ir running at its proper speed of 2.13 ghrtz but i dont know how.
    i have tried increasing the fsb and i got it up to 164 before my whole comp crashed. at 133 it was ok but sed in bios that it ran at 'athlon 2000+'.
    i have also set the jiumper on my motherboardd to the fast version but that does jack all. i have heard ppl talking about ram and i think mine is quite cheap and rubishy it is ddr 256 mgb i dont know any speeds, should i get good ram???
    please email me at leofreak53@hotmail.com
    as the chances are i will forget this webpage url.
    any response would be appreciated as if i cant get it runing i will sell mu comp.
    thanks
    leo.
  18. #10
  19. No Profile Picture
    Registered User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Jun 2004
    Posts
    2
    Rep Power
    0

    leo


    my previous post dont matter any more as i have just got iy working at 2 gighrtz now!!!! yay
    thanks for all.leo
  20. #11
  21. No Profile Picture
    Registered User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Jun 2004
    Location
    Schenectady, NY
    Posts
    3
    Rep Power
    0
    Originally Posted by Known_criminal
    well first thing you need to be aware of , heat, what is the normal operating temp of the cpu now, if it is within 25-39 degrees C you can overclock, far as i would go would be up to 47 during heavy load. overclocking voids any warrenty you may have on you motherboard, processor and ram. or manufacturer's warrenty for the whole pc. depending on your board you may have dip switches on the board which can be set to the desired speed, or it could just be you need to increase the front side bus speed in the bios. some involve different methods. you should have the motherboard manual, if not download it from the biostar site. if you mess around with the settings and the system does not boot, use the cmos jumper to clear the settings and start again. i dont really like to reply to overclocking post because it is not a problem that needs to be fixed, but it is a problem in the making. but you will probably do it anyway so.....make sure you have plenty cooling fans, read the motherboard manual, and use your best judgment. if done wrong this could cost you.
    Known Criminal. Can you please take a look at my issue. I really need some help. Brian
  22. #12
  23. No Profile Picture
    Registered User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Jul 2007
    Posts
    5
    Rep Power
    0
    hey guys

    i have a nvidia 6800 gforce, and a biostar m7ncd (regular, not pro or ultra) motherboard. I have been having problems with many of my games recently, with errors saying " the memory could not be read" so i just bought two separate one gig sticks of corsair ram (high quality) and ran mem test on them, which came back with no errors. I have tried changing memory settings to "slow down the memory" in my bios, like raising the cas latency, but it has not helped. i have updated video drivers and reinstalled the games and it has not helped.

    My computer restarts randomly, and other games randomly close as well, which leads me to believe its a hardware problem, most likely the memory is not getting enough voltage from the motherboard. The annoying part is, this model of motherboard does not allow you to change voltage in its bios, you have to use a separate program, which does not seem to work for me. If anyone knows how i can get this program, called warpspeeder, to allow me to access the "overvoltage pannel " where one changes the voltage......or has any other suggestions to fix the problem, it would be much appreciated....

    btw, i cannot acces the overclock pannel either in the warpspeeder program. I can only access the hardware monitor pannel.
  24. #13
  25. Just another guy
    Devshed Frequenter (2500 - 2999 posts)

    Join Date
    Jun 2003
    Location
    Wisconsin
    Posts
    2,953
    Rep Power
    261
    The error message
    Code:
    The instruction at '<address>' referenced memory at '<address>'.
    The memory could not be read.
    Click OK to terminate the program.
    is often a software problem. What version of windows are you running? Is it fully updated? An exact description of the error, or a screenshot, would also be helpful.

    If you are running Windows XP, be sure you turn off "reboot on error" by right clicking "My Computer", choosing "Properties"->Advanced->Startup and Recovery settings->uncheck "automatic restart".
    This can help by showing the bluescreen if you are having software problems that crash your computer.

    Also be sure to run antivirus and anti-spyware scans, since that can cause random program closures and other strangeness.
    --Dave--

    U2kgSG9jIExlZ2VyZSBTY2lzLCBOaW1pdW0gRXJ1ZGl0aW9uaXMgSGFiZXM=

    My hobby: collecting US coins
  26. #14
  27. No Profile Picture
    Registered User
    Devshed Newbie (0 - 499 posts)

    Join Date
    Jul 2007
    Posts
    5
    Rep Power
    0
    hey there, thanks for responding so quick........i just switched off that auto reboot thing in windows, and i have yet to get a restart, however i have gotten a disconnect, and here is the error i got.

    his application has encountered a critical error:

    ERROR #132 (0x85100084) Fatal Exception
    Program: C:\Program Files\World of Warcraft\WoW.exe
    Exception: 0xC0000005 (ACCESS_VIOLATION) at 001B:005902CE

    The instruction at "0x005902CE" referenced memory at "0x75011C78".
    The memory could not be "written".


    WoWBuild: 6898
    ------------------------------------------------------------------------------

    ----------------------------------------
    x86 Registers
    ----------------------------------------

    EAX=012B4244 EBX=00000000 ECX=012B4008 EDX=43690000 ESI=0BB742F4
    EDI=1F062C10 EBP=0012FA7C ESP=0012FA78 EIP=005902CE FLG=00010646
    CS =001B DS =0023 ES =0023 SS =0023 FS =003B GS =0000


    ----------------------------------------
    Stack Trace (Manual)
    ----------------------------------------

    Address Frame Logical addr Module

    005902CE 0012FA7C 0001:0018F2CE C:\Program Files\World of Warcraft\WoW.exe
    005905CA 0012FB80 0001:0018F5CA C:\Program Files\World of Warcraft\WoW.exe
    00591CEC 0012FBAC 0001:00190CEC C:\Program Files\World of Warcraft\WoW.exe
    00590B6D 0012FBF0 0001:0018FB6D C:\Program Files\World of Warcraft\WoW.exe
    005915F0 0012FCC4 0001:001905F0 C:\Program Files\World of Warcraft\WoW.exe
    0042372F 0012FD64 0001:0002272F C:\Program Files\World of Warcraft\WoW.exe
    0042A3A7 0012FD80 0001:000293A7 C:\Program Files\World of Warcraft\WoW.exe
    0042A8BC 0012FD9C 0001:000298BC C:\Program Files\World of Warcraft\WoW.exe
    0043909A 0012FE68 0001:0003809A C:\Program Files\World of Warcraft\WoW.exe
    0041ED1B 0012FE98 0001:0001DD1B C:\Program Files\World of Warcraft\WoW.exe
    0041C209 0012FF0C 0001:0001B209 C:\Program Files\World of Warcraft\WoW.exe
    0041D661 0012FF24 0001:0001C661 C:\Program Files\World of Warcraft\WoW.exe
    00405868 0012FFC0 0001:00004868 C:\Program Files\World of Warcraft\WoW.exe
    7C816D4F 0012FFF0 0001:00015D4F C:\WINDOWS\system32\kernel32.dll

    ----------------------------------------
    Stack Trace (Using DBGHELP.DLL)
    ----------------------------------------

    005902CE WoW.exe <unknown symbol>+0 (0x0012FBA4,0x000000F0,0x000000F0,0x0BB73478)


    ----------------------------------------
    Loaded Modules
    ----------------------------------------

    0x00330000 - 0x00399000 C:\Program Files\World of Warcraft\DivxDecoder.dll
    0x00400000 - 0x00CEE000 C:\Program Files\World of Warcraft\WoW.exe
    0x0FFD0000 - 0x0FFF8000 C:\WINDOWS\system32\rsaenh.dll
    0x10000000 - 0x10090000 C:\Program Files\World of Warcraft\fmod.dll
    0x1EA00000 - 0x1EB18000 C:\Program Files\World of Warcraft\dbghelp.dll
    0x20B00000 - 0x20B4B000 C:\WINDOWS\system32\imon.dll
    0x4FDD0000 - 0x4FF76000 C:\WINDOWS\system32\d3d9.dll
    0x5AD70000 - 0x5ADA8000 C:\WINDOWS\system32\uxtheme.dll
    0x5B860000 - 0x5B8B4000 C:\WINDOWS\system32\NETAPI32.dll
    0x5D090000 - 0x5D127000 C:\WINDOWS\system32\comctl32.dll
    0x5ED00000 - 0x5EDCC000 C:\WINDOWS\system32\OPENGL32.dll
    0x662B0000 - 0x66308000 C:\WINDOWS\system32\hnetcfg.dll
    0x68B20000 - 0x68B40000 C:\WINDOWS\system32\GLU32.dll
    0x6D990000 - 0x6D996000 C:\WINDOWS\system32\d3d8thk.dll
    0x71A50000 - 0x71A8F000 C:\WINDOWS\system32\mswsock.dll
    0x71A90000 - 0x71A98000 C:\WINDOWS\System32\wshtcpip.dll
    0x71AA0000 - 0x71AA8000 C:\WINDOWS\system32\WS2HELP.dll
    0x71AB0000 - 0x71AC7000 C:\WINDOWS\system32\WS2_32.dll
    0x71AD0000 - 0x71AD9000 C:\WINDOWS\system32\WSOCK32.dll
    0x71BF0000 - 0x71C03000 C:\WINDOWS\system32\SAMLIB.dll
    0x722B0000 - 0x722B5000 C:\WINDOWS\system32\sensapi.dll
    0x72D10000 - 0x72D18000 C:\WINDOWS\system32\msacm32.drv
    0x72D20000 - 0x72D29000 C:\WINDOWS\system32\wdmaud.drv
    0x73760000 - 0x737A9000 C:\WINDOWS\system32\DDRAW.dll
    0x73BC0000 - 0x73BC6000 C:\WINDOWS\system32\DCIMAN32.dll
    0x73EE0000 - 0x73EE4000 C:\WINDOWS\system32\KsUser.dll
    0x73F10000 - 0x73F6C000 C:\WINDOWS\system32\dsound.dll
    0x76390000 - 0x763AD000 C:\WINDOWS\system32\IMM32.dll
    0x769C0000 - 0x76A73000 C:\WINDOWS\system32\USERENV.dll
    0x76B40000 - 0x76B6D000 C:\WINDOWS\system32\WINMM.dll
    0x76C30000 - 0x76C5E000 C:\WINDOWS\system32\WINTRUST.dll
    0x76C90000 - 0x76CB8000 C:\WINDOWS\system32\IMAGEHLP.dll
    0x76E80000 - 0x76E8E000 C:\WINDOWS\system32\rtutils.dll
    0x76E90000 - 0x76EA2000 C:\WINDOWS\system32\rasman.dll
    0x76EB0000 - 0x76EDF000 C:\WINDOWS\system32\TAPI32.dll
    0x76EE0000 - 0x76F1C000 C:\WINDOWS\system32\RASAPI32.DLL
    0x76F20000 - 0x76F47000 C:\WINDOWS\system32\DNSAPI.dll
    0x76F60000 - 0x76F8C000 C:\WINDOWS\system32\WLDAP32.dll
    0x76FB0000 - 0x76FB8000 C:\WINDOWS\System32\winrnr.dll
    0x76FC0000 - 0x76FC6000 C:\WINDOWS\system32\rasadhlp.dll
    0x77120000 - 0x771AC000 C:\WINDOWS\system32\OLEAUT32.dll
    0x771B0000 - 0x77256000 C:\WINDOWS\system32\WININET.dll
    0x77260000 - 0x772FE000 C:\WINDOWS\system32\urlmon.dll
    0x773D0000 - 0x774D2000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
    0x774E0000 - 0x7761D000 C:\WINDOWS\system32\ole32.dll
    0x77690000 - 0x776B1000 C:\WINDOWS\system32\NTMARTA.DLL
    0x77920000 - 0x77A13000 C:\WINDOWS\system32\setupapi.dll
    0x77A80000 - 0x77B14000 C:\WINDOWS\system32\CRYPT32.dll
    0x77B20000 - 0x77B32000 C:\WINDOWS\system32\MSASN1.dll
    0x77BD0000 - 0x77BD7000 C:\WINDOWS\system32\midimap.dll
    0x77BE0000 - 0x77BF5000 C:\WINDOWS\system32\MSACM32.dll
    0x77C00000 - 0x77C08000 C:\WINDOWS\system32\VERSION.dll
    0x77C10000 - 0x77C68000 C:\WINDOWS\system32\msvcrt.dll
    0x77D40000 - 0x77DD0000 C:\WINDOWS\system32\USER32.dll
    0x77DD0000 - 0x77E6B000 C:\WINDOWS\system32\ADVAPI32.dll
    0x77E70000 - 0x77F01000 C:\WINDOWS\system32\RPCRT4.dll
    0x77F10000 - 0x77F56000 C:\WINDOWS\system32\GDI32.dll
    0x77F60000 - 0x77FD6000 C:\WINDOWS\system32\SHLWAPI.dll
    0x77FE0000 - 0x77FF1000 C:\WINDOWS\system32\Secur32.dll
    0x7C800000 - 0x7C8F4000 C:\WINDOWS\system32\kernel32.dll
    0x7C900000 - 0x7C9B0000 C:\WINDOWS\system32\ntdll.dll
    0x7C9C0000 - 0x7D1D4000 C:\WINDOWS\system32\SHELL32.dll


    ----------------------------------------
    Memory Dump
    ----------------------------------------

    Code: 16 bytes starting at (EIP = 005902CE)

    005902CE: FF 83 78 1C 01 75 2A 8B 45 08 0F B6 48 03 0F B6 ..x..u*.E...H...


    Stack: 1024 bytes starting at (ESP = 0012FA78)

    * = addr ** *
    0012FA70: 00 00 00 00 00 00 00 00 38 D0 24 12 80 FB 12 00 ........8.$.....
    0012FA80: CA 05 59 00 A4 FB 12 00 F0 00 00 00 F0 00 00 00 ..Y.............
    0012FA90: 78 34 B7 0B 01 00 00 00 7C FB 12 00 08 AB 57 00 x4......|.....W.
    0012FAA0: A0 63 17 00 03 00 00 00 38 FB 12 00 88 CC 36 0C .c......8.....6.
    0012FAB0: B0 48 2C 01 08 40 2B 01 08 FC 12 00 A0 63 17 00 .H,..@+......c..
    0012FAC0: 18 FB 12 00 03 B7 E7 4F 1D 00 00 00 08 00 00 00 .......O........
    0012FAD0: 08 FC 12 00 00 00 80 3F 00 00 00 00 00 00 00 00 .......?........
    0012FAE0: 00 00 00 00 00 00 00 00 00 00 80 3F 00 00 00 00 ...........?....
    0012FAF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 3F ...............?
    0012FB00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    0012FB10: 00 00 80 3F 44 85 16 00 C5 2A E5 4F 44 85 16 00 ...?D....*.OD...
    0012FB20: E4 D5 86 00 00 00 00 00 48 FB 12 00 03 EC E1 4F ........H......O
    0012FB30: C3 07 00 00 20 98 EA 16 C1 09 9C 3A 88 CC 36 0C .... ......:..6.
    0012FB40: 08 5F 87 03 08 5F 87 03 00 00 00 00 88 45 2C 01 ._..._.......E,.
    0012FB50: 08 46 2C 01 A4 FB 12 00 00 00 20 42 00 00 7A 43 .F,....... B..zC
    0012FB60: 2A 00 00 00 00 C0 00 00 00 00 00 00 C4 00 00 00 *...............
    0012FB70: 00 00 94 43 00 00 69 43 08 40 2B 01 88 6A 95 25 ...C..iC.@+..j.%
    0012FB80: AC FB 12 00 EC 1C 59 00 78 34 B7 0B 34 D0 24 12 ......Y.x4..4.$.
    0012FB90: 34 D0 24 12 38 D0 24 12 78 D0 24 12 00 00 80 3F 4.$.8.$.x.$....?
    0012FBA0: 00 00 00 00 00 00 00 FF F0 00 00 00 F0 FB 12 00 ................
    0012FBB0: 6D 0B 59 00 78 34 B7 0B 00 00 00 00 00 00 00 00 m.Y.x4..........
    0012FBC0: F0 00 00 00 88 CC 36 0C C8 41 85 07 B8 49 2C 01 ......6..A...I,.
    0012FBD0: A0 00 00 00 08 46 2C 01 00 00 00 00 C8 41 85 07 .....F,......A..
    0012FBE0: 00 00 00 00 00 00 00 00 88 01 00 00 08 D0 24 12 ..............$.
    0012FBF0: C4 FC 12 00 F0 15 59 00 84 EC 8E 07 04 00 00 00 ......Y.........
    0012FC00: 48 46 2C 01 00 00 80 3F 00 00 00 00 00 00 00 00 HF,....?........
    0012FC10: 00 00 00 00 00 00 00 00 00 00 80 3F 00 00 00 00 ...........?....
    0012FC20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 3F ...............?
    0012FC30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    0012FC40: 00 00 80 3F 00 00 80 3F 00 00 00 00 00 00 00 00 ...?...?........
    0012FC50: 00 00 00 00 00 00 00 00 00 00 80 3F 00 00 00 00 ...........?....
    0012FC60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 3F ...............?
    0012FC70: 00 00 00 00 6B 16 D9 BE 03 AE 87 BE 00 00 00 00 ....k...........
    0012FC80: 00 00 80 3F 96 F1 16 40 00 00 00 00 00 00 00 00 ...?...@........
    0012FC90: 00 00 00 00 00 00 00 00 89 82 71 40 00 00 00 00 ..........q@....
    0012FCA0: 00 00 00 00 00 00 00 80 00 00 00 80 6F 12 03 BB ............o...
    0012FCB0: 00 00 00 00 EE 51 84 B9 EE 51 84 39 00 00 00 80 .....Q...Q.9....
    0012FCC0: 00 00 80 3F 64 FD 12 00 2F 37 42 00 88 CC 36 0C ...?d.../7B...6.
    0012FCD0: 06 00 00 00 B8 49 2C 01 00 00 00 00 03 33 42 00 .....I,......3B.
    0012FCE0: 04 00 00 00 F7 32 42 00 00 00 00 00 08 EC 8E 07 .....2B.........
    0012FCF0: 84 EC 8E 07 00 00 00 00 00 00 00 00 00 00 00 00 ................
    0012FD00: 00 00 80 3F D0 FC 12 00 08 6D EB 19 03 00 00 00 ...?.....m......
    0012FD10: 00 00 00 00 06 00 00 00 03 00 16 40 10 00 00 00 ...........@....
    0012FD20: D0 FC 12 00 E0 FC 12 00 00 00 00 00 00 00 00 00 ................
    0012FD30: 00 00 00 00 3C 00 00 00 48 46 2C 01 3C 28 47 09 ....<...HF,.<(G.
    0012FD40: FF FF FF FF 02 00 00 00 00 00 00 00 08 46 2C 01 .............F,.
    0012FD50: 06 00 00 00 04 00 00 00 08 40 2B 01 30 00 00 00 .........@+.0...
    0012FD60: CA CB EE 24 80 FD 12 00 A7 A3 42 00 84 EC 8E 07 ...$......B.....
    0012FD70: EC 6C 4E 07 08 00 00 00 08 60 4E 07 E8 EE A0 0D .lN......`N.....
    0012FD80: 9C FD 12 00 BC A8 42 00 88 51 0D 02 A0 A6 8E 08 ......B..Q......
    0012FD90: 88 A6 8E 08 00 00 00 00 00 00 00 00 68 FE 12 00 ............h...
    0012FDA0: 9A 90 43 00 00 00 00 00 90 A6 8E 08 A0 A6 8E 08 ..C.............
    0012FDB0: 6F 12 83 3C 30 95 02 02 08 94 02 02 A8 9A 02 02 o..<0...........
    0012FDC0: 10 30 E8 3E 43 1E B3 BE DB 51 6A 3F 7F 54 4C 3E .0.>C....Qj?.TL>
    0012FDD0: 30 FE 12 00 30 FE 12 00 AC DC 00 10 A0 24 01 10 0...0........$..
    0012FDE0: 58 28 08 05 E0 DC 00 10 58 28 08 05 40 00 00 00 X(......X(..@...
    0012FDF0: D1 D2 21 C4 B5 8C CB 42 50 90 09 C6 00 00 00 00 ..!....BP.......
    0012FE00: 00 00 00 00 00 00 00 00 E1 89 4B BF CE 34 CE BE ..........K..4..
    0012FE10: 10 30 E8 3E 43 1E B3 BE DB 51 6A 3F 7F 54 4C 3E .0.>C....Qj?.TL>
    0012FE20: 00 00 80 3F 00 00 80 40 00 00 80 3F 54 FE 12 00 ...?...@...?T...
    0012FE30: 54 FE 12 00 54 FE 12 00 C5 C5 6E 00 50 90 09 C6 T...T.....n.P...
    0012FE40: 00 00 00 00 00 00 00 00 00 00 80 3F 00 00 80 3F ...........?...?
    0012FE50: 00 00 00 00 00 00 80 3F 00 00 00 00 00 00 80 3F .......?.......?
    0012FE60: 00 00 00 00 00 00 80 3F 98 FE 12 00 1B ED 41 00 .......?......A.
    0012FE70: 00 00 00 00 00 00 00 00 08 94 02 02 00 00 00 00 ................


    ------------------------------------------------------------------------------

    ======================================================================
    Hardware/Driver Information:
    Processor: 0x0
    Page Size: 4096
    Min App Address: 0x10000
    Max App Address: 0x7ffeffff
    Processor Mask: 0x1
    Number of Processors: 1
    Processor Type: 586
    Allocation Granularity: 65536
    Processor Level: 6
    Processor Revision: 2560

    Percent memory used: 24
    Total physical memory: 2146942976
    Free Memory: 1629843456
    Page file: -1499336704
    Total virtual memory: 2147352576




    I also run virus scans all the time, so i dont think its that. If i had to guess, it might be the fact that im running the same version of windows xp that i started with, two years ago. Do you think reinstalling windows, and totally clearing my harddrive would help to fix the problem?
  28. #15
  29. Just another guy
    Devshed Frequenter (2500 - 2999 posts)

    Join Date
    Jun 2003
    Location
    Wisconsin
    Posts
    2,953
    Rep Power
    261
    From looking online, that error seems common with world of warcraft, particularly recently. this link has a few suggestions from blizz about fixing the problem. Do you get the error only when playing wow, or when playing games, or just completely at random?
    I assume when you say "same windows xp as 2 years ago", you mean you haven't re-installed windows, but that you have kept up to date with updates, service packs, and the like?
    --Dave--

    U2kgSG9jIExlZ2VyZSBTY2lzLCBOaW1pdW0gRXJ1ZGl0aW9uaXMgSGFiZXM=

    My hobby: collecting US coins
Page 1 of 2 12 Last
  • Jump to page:

IMN logo majestic logo threadwatch logo seochat tools logo