|
|||||||||
|
|||||||||
| |||||||||
|
|
|
| |||||||||
 |
|
|
«
Previous Thread
|
Next Thread
»
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
Dev Shed Forums Sponsor:
|
|
|
|
#1
September 9th, 2004, 07:56 PM
|
|||
|
|||
|
VPN DNS 2k3
I have recently set up a 2003 server for a small domain. The Sever is set to handle DNS for the domain only. I have a Linksys BEFVP 41 router to connect to a managed domain. Static ip and so on. I use the router as the end point for VPN tunnels. I have the following problem. I need to map drive for a software using Names not IP addresses. On the local network this is no problem. But connecting throught the VPN tunnel I can't get the name to work, only by IP address. Is there any clue to where I should look to fix this? Thanks, Jeff
|
|
#2
September 10th, 2004, 06:59 PM
|
||||
|
||||
|
Are you using a fully qualified domain or a netbios name?
__________________
Send me a private message if you would like me to setup your DNS for you for a price of your choosing. This is the preferred method if your DNS needs to be fixed/setup fast and you don't have the time to bounce messages back and forth on a forum. Also, check out these links: Whois Direct | DNS Crawler | NS Trace | Compare Free DNS Hosts
|
|
#3
September 10th, 2004, 08:22 PM
|
|||
|
|||
|
Acutally I solved the problem. I was using a VPN client but now since most clients are using XP Pro I switched to the Microsoft VPN and configured the TCPIP properties to use the DNS server on the remote network for the IP Address for the VPN connection. Thanks for your reply.
|
|
| Viewing: Dev Shed Forums > System Administration > DNS > VPN DNS 2k3 |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
 |
|
|
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
Linear Mode
