|
|||||||||
|
|||||||||
| |||||||||
|
|
|
| |||||||||
 |
|
|
«
Previous Thread
|
Next Thread
»
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
Dev Shed Forums Sponsor:
|
|
|
|
#1
June 29th, 2003, 12:00 PM
|
|||
|
|||
Conexant modem in RH7.0
i ve installed red hat 7.0 in my PC which has conexant modem on it.I downloaded the grivers for it and opened the RPM...It said that it should work,but my kppp could not locate the modem...However when i swithched the flow control thing off, had found something (in modem query window it said "modem ready"),but when i tried to connect it gave the message that it is inicializing,but kept inicilalizing forever with no results....
Does anybody have a idea about the cause of this and a possible solution???? Regards Analyst
|
|
#2
June 30th, 2003, 08:08 PM
|
||||
|
||||
|
kppp and rp3 DO NOT get along with Conexant chipsets in my experience. I've tried in vain to make it work, but it just won't. Try using wvdial to get a connection. Failing that, do it the hard way using minicom and the pppd manually.
The whole time, remember to check in /var/log/messages (or, if you changed the log file, the comparable log) for details about problems you encounter.
|
|
| Viewing: Dev Shed Forums > Operating Systems > Linux Help > Conexant modem in RH7.0 |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
 |
|
|
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
Linear Mode
