Buggy debug port?

Hello all

I've been to another forum about this topic already, but haven't heard anything back in a while. So I'll ask people here.

I've got an Epox 8KRA2+ mobo, kt600 chipset, blah blah blah. Anyway, I've got the debug port spitting out random codes, all in the 20's......21 through 28. I read the book, but it doesn't make sense to me, especially on how to fix the problem. The board isn't unstable, but I'm just wondering if something's about to break. I run a 2100+ at 2.03 Ghz on a 169 bus x 12, with ddr 333 (2x512 timings of 2-3-3-6) on 1.6 volts. Anyone got any ideas? here are the codes.

Code 20:"reserved" Code 21: "HPM initialization (notebook platform)" Code 22: "Reserved" 23: "1. Check validity of RTC value 2. Load CMOS settings into BIOS stack. If CMOS checksum fails, use default value instead 3. Prepare BIOS resource map for PCI & PnP use. If ESCD is valid, take into consideration of the ESCD's legacy infomation 4. Onboard clock generator initialization. Disable respective clock resource to empty PCI & DIMM slots 5. Early PCI initialization" 24-26: "Reserve" 27. "Initialize INT 09 buffer"

If anyone has any suggestions, please let me know, and thanks again!