|
|||||||||
|
|||||||||
| |||||||||
|
|||||||||
|
|||||||||
| |||||||||
|
|
|
| |||||||||
 |
|
|
«
Previous Thread
|
Next Thread
»
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
Dev Shed Forums Sponsor:
|
|
|
|
#1
September 5th, 2004, 10:45 AM
|
|||
|
|||
|
m825g beeps four times at power up and doesnt go any further
I have just changed the power supply on my pc to a 400W one. The motherboard now just beeps four times and the power stops. Any ideas?
|
|
#2
September 5th, 2004, 08:54 PM
|
||||
|
||||
|
You need to see what brand of bios you have, then look up the 4 beep code. It might be in your manual.
Check all your connections, and make sure you have the power supply set to "110v" instead of "220v", which would probably have fried the mobo (and be the cause of the problem)
__________________
--Dave-- U2kgSG9jIExlZ2VyZSBTY2lzLCBOaW1pdW0gRXJ1ZGl0aW9uaXMgSGFiZXM=
|
|
#3
September 8th, 2004, 01:43 PM
|
|||
|
|||
|
My Motherboard is a PCChips M825G V9.2C and has American Megatrends (AMI)
BIOS. The 220 voltage has always been alright with the mobo, in the UK our mains is 240.
|
|
#4
September 8th, 2004, 02:45 PM
|
||||
|
||||
|
Then 4 beeps indicates a memory error. Check that they are seated firmly (might have been bumped during the install). Try with each stick individually in different slots. Try different, known good ram. If none of that fixes it, it again points to a broken mobo.
|
|
| Viewing: Dev Shed Forums > Computer Hardware > Motherboards > m825g beeps four times at power up and doesnt go any further |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
 |
|
|
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
Linear Mode
