MSI 6330 v 2.1 No video

OK I am very much an amature pc builder.

bought a new msi 6330 v2.1 MB put a Duron 1100mhz morgan in it inwhich I used in a previous board. I bought the new one casue the old mb didnt have an AGP port.

anyway- found out that the msi mb is an OEM gateway thing. and of course they wouldnt help me. MSI shunned me also. I was told by Asrenalpc.com (sold the board to me) that this board only supports the Athlon Thuderbird up to 1200mhz. so I just gota t-bird 1100mhz cpu. Pluggedd it all in and everything fires up and I get a single pc "beep" when i do. I still get to Video. there is no onboard video for this board. I have various Video cards from ati and Nvidia PCI and AGP and still get no video. I was reading bits and parts from the info provided by AMD- I am curently using the old hard drive 20gb maxtor5200rpm. with out ever formating or clearing it.

any ideas on why No video would be great.

MSI mb 6330 v 2.1
T-bird 1100mhz
chipset kt133
400w PS
512 mb SDRAM (pc133 not sure the brand)
5200pgm 20gb HDD
New cdrom
New floppy

(^^;?(I couldn't figure out the whole.)

But all the devices spins up and you experimented all the video cards that you have on the board.

And you get no picture on display. Is it correct?

Then, There's no reason why all the cards shouldn't make effect.

Check CPU and memory again upon other board. If they are O.K.

You should have the mobo checked by the vender.

That board uses leds, visible from inside the computer, to show errors, rather than beep codes. They flash in different combinations before settling to all green if everything is ok. I think it came with a sheet to interpret the light pattern if there is an error. See if that helps.