August 1st, 2010, 04:28 PM
No POST, no beeps, plenty of power.
My computer was working fine and suddenly there was no video. When it is turned on, there is no output to the monitor. I have a second computer, so I plugged the video card into it and it worked. I figured the problem was the MB, so I ordered a new one, but still same problem. I've returned to the original MB and tried replacing the video card, memory, and CPU from my second computer, one component at a time--no joy. I've re-assembled the second computer and now it is doing the same thing as the first computer. No video when turned on. Very frustrating. I've removed and replaced CMOS battery on both computers. Any ideas?
August 2nd, 2010, 07:52 AM
Have you checked to make sure the monitor is working correctly?
August 3rd, 2010, 06:07 PM
Yep, thanks. Tried them on another monitor, still no joy. Any other ideas?
August 4th, 2010, 08:57 AM
Wait so both computers are doing the same thing? Or you mean the old and new components are doing the same thing? Are you using the same PSU?
August 9th, 2010, 04:28 PM
Now both computers are doing the same thing. Neither one will transmit video to the monitor and both have their own PSUs. All I can figure is that one component (motherboard?) caused a short and by swapping each of the components, it damaged something from my second computer. Power is being supplied to all components, video, motherboard, and main, as far as I can tell. I tried taking the motherboard out of the case and still no joy, so it was not shorting off the case.
August 28th, 2010, 12:54 PM
So, does anyone have any ideas I can try?? Thanks.
September 20th, 2010, 08:33 AM
no disply.. No beep...no post
I am also fasing the same problem. When i was working on my pc, monitor got no disply, keybrd got stuckd. When i restart the system its not booting. Green led is glowg on cpu and fan is workg fine. But no signal is passing to keyboard, monitr and mouse. Can anybody help me in this problm?..