|
|||||||||
|
|||||||||
| |||||||||
|
|||||||||
|
|||||||||
| |||||||||
|
|
|
| |||||||||
 |
|
|
«
Previous Thread
|
Next Thread
»
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
Dev Shed Forums Sponsor:
|
|
Be the architects of evolution and help create the mobile internet future. It’s your move---enter to win here! |
|
#1
July 2nd, 2004, 10:18 AM
|
|||
|
|||
|
map network drive from mac to win 2k3
Hello everybody,
I am having trouble connecting mac os x to a share folder in win 2k3. I have installed appl talk serverce in win2k3, but the mac cannot see it in the network. apple talk is also enabled in mac. any ideas. Thank you.
|
|
#2
July 2nd, 2004, 01:30 PM
|
||||
|
||||
|
Thread moved to Networking.
|
|
#3
July 3rd, 2004, 09:11 AM
|
|||
|
|||
|
You don't need apple talk from my experience. In fact, I just recently implemented a Win 2003 Server in a clients office which had 2 MACs.
1) First get your network settings correct. Make sure your IP is on the same subnet as your network. Assign static information for the IP, Subnet Mask, Gateway, and DNS Server. 2) Check and see if you can surf the net. If you can't, then you have an issue with your network settings. If your good to go then proceed to step 3. 3) Then connect to server and type in whatever the IP of the server is. i.e. smb://192.x.x.x Or usually if your on the same subnet and your IP does not conflict with another computer on the network, it will recognize all the Domains on the network and you just map from there. Good luck.
|
|
| Viewing: Dev Shed Forums > System Administration > Networking Help > map network drive from mac to win 2k3 |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
 |
|
|
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
Linear Mode
