February 17th, 2013, 11:46 AM
|
|
Registered User
|
|
Join Date: Feb 2013
Posts: 1
Time spent in forums: 1 m 35 sec
Reputation Power: 0
|
|
|
Porting config from 2950 to zyxel gs1910
I am trying to figure out how to port configuration from a cisco 2950 to a zyxel gs1910. the configuration on the cisco is pretty staright forward. I need to configure an uplink port to the router which can handle all VLAN which currently looks like this
Code:
interface GigabitEthernet0/1
description T2_ROURTER_UPLINK
switchport mode trunk
And most of my other ports look like this
Code:
interface FastEthernet0/31
switchport trunk allowed vlan 1,2
switchport mode trunk
spanning-tree portfast
The above configuration allows for a comptuer and and a phone to be connected to it. computer is on vlan 1 and the phone tags its packet for vlan 2.
The part of the configuration on the Zyxel GS1910 that is really throwing me off is the 'VLAN port configuration' page. There are options of ingress type, Frame check and mode.
If anyone can advise me on how to proceed on this i would be very grateful.
If you require any further information, please ask.
|
Del.icio.us
Digg
Google
Spurl
Blink
Furl
Simpy
Y! MyWeb
Linear Mode
