October 21st, 2003, 02:14 AM
Unable to connect to lan
Even when there is no activity light,data transfer rate is 1 byte.
Reinstalled nic drvs.
pings to local host,but cannot connect to other pc's/server.
Is it nic or port/cable?
October 21st, 2003, 06:26 PM
You are missing a ton of information for anyone to figure out what the problem is. So it can be all three. You might want to include the following:
Static or dhcp addresses?
results of pinging 127.0.0.1 [loopback address of the nic]
results of a ipconfig at a command prompt
Use a known good patch cable
Switch to a different port in the switch
Swap the nic [same nic will mean you won't have to reinstall networking]
Use a known good pc to connect to the same wall port being used and see if you can connect.
October 21st, 2003, 09:36 PM
Thx a ton for your advise.
After trying the T/S suggestions i found its the on-board nic.